2, bearing/hub assemblies (Timken HA591339 or National 15-515018) Reference
89-94 Chevy K series 4x4 Diesel truck (95-2000 bearings have sensors
for anti-lock brakes so aren't used here)
2, knuckle dust plates
2, aluminum spacers (3.5”)
2, rotors
2, axle assemblies with longer shafts
2, axle washers (Dorman 618-057)
2, axle nuts
2, banjo bolts
2, shear castle nuts
2, brake hoses (Dorman H380-533) Note: you could use one H380-533(left) and one H380-534 (right), but the only difference is in the brackets, which are not used.
2, upper control arm offset bushings (Moog K7104)
2, upper control arm urethane bushings (Energy Suspension
ES3392, see Note)
2, upper control arm ball joints (Moog K680)
2, lower control arm ball joints (Moog K6291)
4, lower control arm urethane bushings (Energy Suspension
ES3391, see Note)
8, knuckle to bearing bolts (GM88891741)
16, bearing to rotor wheel studs (Dorman 610-332)
16, stud nuts (Dorman 610-110)
16, spacer wheel studs (Dorman 610-189)
6, 12-point flange head ASTM Grade A574 3/8"-24 x 1” cap screws.
6, 12-point flange head ASTM Grade A574 3/8"-24 x 1-1/4” cap
screws.
12, 3/8" lock washers
Note: Energy Suspension Kit 3.3181 includes 4 each upper and lower urethane bushings.
Replacement outer CV joint boots are part number BT-257